Yamagishi Complexity Torus LabYamagishi Lab

[Paper 1125] The +C of Volume and the Number Read Outside a Skin Are Two Ends of One Integral, and the Hidden Interior Lies in Between

Abstract

Paper 12 wrote that adding up the area 4πr² of a spherical skin over the radius gives back the volume, and that the indefinite integral carries a constant +C. Paper 1107 showed numerically that what can be read from outside a closed skin is one number per angular pattern, and that rearrangements of the interior that keep this number are invisible from outside. Paper 111 wrote that light fixes 9 of the 10 components of the metric, and that the remaining size is a function on spacetime along the route of Ehlers, Pirani and Schild and a single constant along the route of Zeeman. This paper asks whether these three things that the skin and light leave undecided share a root or have distinct roots, and whether they split into constants and functions. Each leftover is written as the part that some measurement sends to zero, and its number is counted while the grid is refined (the number follows from the form of the map, and singular values check that this holds up in double precision). If the number does not grow, the leftover is a constant; if it grows with the cuts, it is a function. This paper claims no new theorem or law.

Reading the area per radius (the derivative of the volume) leaves exactly 1, whether 10, 100 or 1000 points are used. This is the +C, and it is the value at the inner end (radius 0) of the integral. Reading only the areas on the two ranges 0 to 1 and 2 to 3 leaves 2, and the second corresponds to the volume 28π/3 of the shell not read not being fixed by the areas. The +C is left once per connected part. Adding one end value, inner or outer, leaves nothing. No +C appears in the definite integral of Paper 12 because it asks for the difference V(c) − V(0) of the two end values, in which the +C cancels (Paper 62); reading that difference as the volume of the ball of radius c places the inner end value V(0) = 0 (a single point at the centre has no volume).

The one number per angular pattern read from outside the skin is the value at the outer end of a radial integral (for pattern ℓ the shell masses are weighted by the ℓ-th power of the radius, Paper 1107; for ℓ = 0 it is the total mass, the same integral as the +C). A point of mass 0.7 was placed at the centre of a uniform ball of density 1, and the field was found at three outer points by adding up the body directly. The number read from outside is 4π/3 + 0.7 = 4.88879020479, and subtracting the contents shell by shell gives back the 0.7 of the centre point to within 5.04×10⁻¹⁴. Given the outer end and the interior in between, the +C at the inner end is fixed. Reading only the outside leaves the interior in between. With M shells between radius 0.05 and 0.8, for every pattern ℓ = 0 to 4, the number left is 9, 19, 39, 79 for M = 10, 20, 40, 80, growing with the cuts. The interior hidden from outside is a function. With the centre point included, M are left by the outside alone, 1 (the +C) by the shell-by-shell reading alone, and 0 by both.

Light alone reads 9 of the 10 components of the metric and leaves 1 per point. With 1, 16 and 81 points on a spacetime grid, the numbers left are 1, 16 and 81: a function. Free fall and clocks read the derivative of the logarithm of this size (Paper 111 and Paper 150). Reading the derivative leaves 1 even as the four-dimensional grid grows from 16 to 625 points, 2 for two places not joined by paths of comparison, and nothing once the unit is fixed at one point. If the derivative being read is not a gradient, a ruler carried around a loop comes back with a different length (by a factor of 4.810477381 in the example here), and not even one constant is left (the second clock effect). On a flat stage (Zeeman), the conformal transformations stop at finitely many in three and four dimensions (Paper 251), their size part is made of constants and linear expressions, and the condition of being a one-to-one map of the whole spacetime leaves one constant. In two dimensions it grows with the degree.

Reading the growth exponent from the ratio of the numbers left as the grid is refined, the +C and the unit after clocks give 0, the interior left by the outside alone gives 1 in the radial cut, and light alone gives 4 in the spacetime cut (when shells and patterns are refined together, the count of Paper 1107 gives (M−1)(L+1)² + 1 left, and the exponent of that formula approaches 3 from above, 3.018358 at n = 80). By the criterion of Paper 300, the +C and the number read from outside are the two ends of the same integral and share a root, and the +C and the unit after clocks are both end values left after reading a derivative and share a root. The interior hidden from outside is the function in between and has a root distinct from the end values. Which is left is decided not by the object but by what is measured. The separator is whether a measurement reads the end values of an integral or the derivative in between.

Keywords: integration constant, volume restoration, inverse source problem, conformal factor, connected component, endpoint value, separator.

Scope (what is not claimed)

This paper claims no new theorem or law. The following are standard: that reading a derivative leaves one constant per connected part (the fundamental theorem of calculus and the counting of connected parts); that the field outside is fixed by the multipole coefficients (Kellogg 1929), and that the inverse source problem has no unique solution (the scope note of Paper 1107); that light and free fall fix a Weyl structure, and that without a second clock effect the metric is fixed up to a constant factor (Weyl 1921; Ehlers, Pirani and Schild 1972; Paper 111); that in Minkowski spacetime of dimension 3 or more the one-to-one maps keeping the causal order are made of time-orientation-preserving Lorentz transformations, translations and an overall stretch (Zeeman 1964, without even assuming continuity); and that conformal maps in three or more dimensions are given by finitely many numbers (Liouville’s theorem). Counting with singular values follows Paper 1107; singular values smaller than 10 to the power −11 (the maps to the outside field) or −10 (the other maps) times the largest were taken as zero. What is added is putting the three things that the skin and light leave undecided on one measure (the number of the part a measurement sends to zero, and how it grows as the grid is refined); lining up the +C of volume restoration and the number read from outside the skin (the total mass for pattern ℓ = 0) as the values at the inner and outer ends of the same radial integral, and checking by adding up fields directly that the +C comes back from the outer end and the interior in between; counting that the +C is left once per connected part; and remeasuring the results of Paper 111, Paper 150 and Paper 251 on the side of light with the same measure. Placing a point at the centre is a device to make the +C visible; for a smooth interior the inner end value is 0 for every pattern. The scope note of Paper 12 wrote that no integration constant appears in the definite integral from 0 to c. This paper sits in that seat and reads the step of taking the value of the definite integral as a volume as the placing of one inner end value. Paper 62 read the +C as the baseline of volume, cancelling between the limits in a definite integral and corresponding in the Newtonian limit to the mass of a point at the centre. Paper 72 read the cosmological constant as an integration constant. This paper does not enter the relation between the +C and the cosmological constant; it counts only which measurements leave the +C and which fix it. Paper 1107 showed numerically that one number per pattern goes out, and that cutting the interior into M steps makes the visible fraction 1 over M. This paper reads that one number as the value at the outer end of the radial integral. Paper 1114 showed numerically that a point, a skin and balls are the same from outside, and Paper 1116 that confocal ellipsoids are the same from outside; the family of uniform balls here sits beside them. Paper 111 wrote that the size left by light is a function along the route of Ehlers, Pirani and Schild and a constant along the route of Zeeman, with distinct roots. Paper 150 compared the connections of two conformally related metrics and checked that they share their geodesics only when the factor is constant (Weyl 1921); this is the case without a second clock effect. Paper 251 wrote that the group of conformal maps has dimension (d+1)(d+2)/2 in three or more dimensions and is infinite in two. This paper remeasures these three by the number left and how it grows, and reads the function and the constant as the in-between part and the end value of the logarithm of the size. Paper 107 separated symmetries into global ones with finitely many numbers and local ones with arbitrary functions. The constants and functions here are not a division of symmetries but of what measurements leave undecided. Paper 1051 wrote whether the boundary determines the interior in terms of the numbers of unknowns and data. This paper counts those numbers while refining the grid. This paper says neither that the +C is the energy of the vacuum nor that it is not (the reading of Paper 12). It does not say that light raises space. It says only that what the skin and light leave undecided splits into end values (constants) and the interior in between (functions), and that which is left is decided by what is measured. The gauge freedom of the vector potential (Paper 96 and Paper 107) appears to fall on the side of functions by the same measure, but it is not counted here. Narrowing the factor by a condition of constant curvature (Paper 23), interiors of general shape, and quantum matters are not treated.

1. Three leftovers

Paper 12 wrote that adding up the area $4\pi r^2$ of a spherical skin over the radius gives back the volume. The $C$ in

$$\int 4\pi r^2\,dr=\frac{4}{3}\pi r^3+C$$

is not fixed by the areas. Paper 1107 showed numerically that what can be read from outside a closed skin is one number per angular pattern, and that rearrangements of the interior that keep this number are invisible from outside. Paper 111 wrote that light fixes 9 of the 10 components of the metric, and that the remaining size is a function on spacetime (the local conformal factor) along the route of Ehlers, Pirani and Schild and a single constant (an overall stretch) along the route of Zeeman. The skin and light leave these three undecided. This paper asks whether the three share a root or have distinct roots, and whether they split into constants and functions.

All three can be written as the part that some measurement sends to zero. A measurement is a linear map $A$ from the list of numbers describing the contents to the list of measured values, and the part that $A$ sends to zero is called the leftover. Its number is counted as the singular values of $A$ smaller than $10^{-10}$ times the largest ($10^{-11}$ times, as in Paper 1107, for the maps to the outside field), plus the excess of columns over rows. For every map the number follows from its form (the difference matrix has one row fewer than columns, the kernel for each pattern is a product of a function of the source radius and a function of the observation radius, and the map of light splits point by point). Singular values were used to check that this holds up in double precision, with a wide gap between the values taken as zero and those kept. If the number does not grow as the grid is refined, the leftover is a constant (finitely many numbers); if it grows with the cuts, it is a function. From the numbers $c_1$ and $c_2$ left when the cut is refined from $n_1$ to $n_2$, the growth exponent $\log(c_2/c_1)/\log(n_2/n_1)$ is read. It is 0 for a constant.

The gravitational constant is $G=1$, and fields were found by splitting the contents into fine points and adding them up directly (Gaussian quadrature, double precision). Differences of about $10^{-14}$ below are the size of double-precision rounding and change with the route of computation. The shell theorem was not used for the answers.

2. The +C of volume restoration is the inner end value

Adding up the area $4\pi r^2$ from radius 0 to 1 by Gaussian quadrature gives 4.18879020479, which differs from $4\pi/3$ by $1.42\times10^{-14}$. Place $N$ points on $[0,1]$ and read the differences of volume between neighbouring points (the area added up between them). This is the measurement that reads the derivative of the volume. The difference matrix sends exactly 1 to zero for each of $N=10$, 100 and 1000. It has one row fewer than columns, so the one sent to zero comes from the extra column; none of its $N-1$ singular values is zero (the smallest is $1.58\times10^{-1}$, $1.57\times10^{-2}$ and $1.57\times10^{-3}$ times the largest), and none is dropped by the threshold. Restoring the volume from the differences read gives $4\pi r^3/3$ plus one constant (after removing the constant, the difference is $8.25\times10^{-14}$ with 1000 points), and that constant is the +C. The +C is the value at the inner end ($r=0$) of the integral.

Splitting the range in two and reading only the areas on $[0,1]$ and $[2,3]$ ($[1,2]$ is not read) leaves 2 for each of $N=10$, 100 and 1000. The second constant corresponds to the volume of the shell not read ($V(2)-V(1)$, whose value is $28\pi/3=29.3215314335$) not being fixed by the areas. With $N=100$, adding $V(0)=0$ and $V(2)-V(1)=28\pi/3$ to the reading leaves nothing, and the volume $4\pi r^3/3$ on the two ranges comes back to within $4.12\times10^{-13}$ (if the second is read as $V(2)$ itself, its value is $32\pi/3$). The +C is not one for the whole but one per connected part.

Adding one end value leaves nothing. With $N=100$, adding either the inner end value $V(0)$ or the outer end value $V(1)$ leaves 0. For the two ranges, adding only $V(0)$ leaves 1, and adding $V(0)$ and $V(2)$ leaves 0. Setting the outer end value to $V(1)=4\pi/3+0.7=4.88879020479$ (with the density set to 1, volume and the mass of the next section are the same number; 0.7 is the mass of the point placed at the centre in the next section, which corresponds to the +C in the reading of Paper 62) and solving together with the areas per radius gives back the inner end value 0.699999999999995 (differing from 0.7 by $5.22\times10^{-15}$). As the scope note of Paper 12 wrote, no +C appears in the definite integral from 0 to $c$. The definite integral is the difference $V(c)-V(0)$, in which the +C cancels (in the words of Paper 62, it cancels between the limits). In the words of this paper, reading that value as the volume of the ball of radius $c$ corresponds to placing one inner end value, $V(0)=0$ (a single point at the centre has no volume).

3. The number read from outside the skin is the outer end value

Paper 62 wrote that the +C corresponds in the Newtonian limit to the mass of a point at the centre. The mass $q(r)$ of the contents within radius $r$ is the sum of the contents shell by shell (the masses of the shells) plus the mass $C$ of the point at the centre. The number for pattern $\ell=0$ read from outside is the total mass $q(R)$, which is the value at the outer end of the same integral. The number for pattern $\ell$ is the value at the outer end of the integral of the shell masses weighted by the $\ell$-th power of the radius (Paper 1107); it is the same integral as the +C only for $\ell=0$.

A point of mass 0.7 was placed at the centre of a uniform ball of density 1 and radius 1. At three outer points 1.5, 2.0 and 4.0 from the centre, the field of the ball was added up directly (48 Gaussian points in the radius and in $\cos\theta$, 96 equal steps in $\varphi$) and the field of the point added. The number read from outside (the magnitude of the force times the squared distance) is 4.88879020479 at all three points, differing from $4\pi/3+0.7$ by at most $3.64\times10^{-14}$, and the transverse share of the force is at most $5.44\times10^{-15}$. Subtracting the sum $4\pi/3$ of the contents shell by shell gives back the 0.7 of the centre point to within $5.04\times10^{-14}$. Given the outer end value and the interior in between, the +C at the inner end is fixed. This has the same form as the route through volume in the previous section ($5.22\times10^{-15}$).

Reading only the outside leaves the interior in between. As in Paper 1107, the component of the kernel for pattern $\ell$ is written

$$K_\ell(r,s)=\int_{-1}^{1}\frac{P_\ell(\mu)\,d\mu}{\sqrt{r^2+s^2-2rs\mu}}$$

($P_\ell$ is the Legendre polynomial; 400 Gaussian points in $\mu$), and the map was built from the contents of $M$ shells between radius 0.05 and 0.8 to the field (the potential) at 40 radii from 1.25 to 3.0. The second singular value is at most $4.34\times10^{-12}$ times the largest, so one number per pattern goes out. The numbers left are as follows and grow with the number of cuts.

shells $M$outside only (any $\ell$ from 0 to 4)$\ell=0$ with the centre point: outside onlyshell by shell onlyboth
1091010
20192010
40394010
80798010

The interior hidden from outside is the part in between the ends, and it is a function. With the centre point included, $M$ are left by the outside alone, 1 (the +C) by the shell-by-shell reading (the derivative in between) alone, and 0 by both. The outside measurement and the shell-by-shell measurement each read what the other leaves. For a smooth interior the inner end value is 0 for every pattern, and reading shell by shell also fixes the outer end.

Fixing a family of shapes in advance shrinks the function to one number. Uniform balls of mass 1 with radii 0.3, 0.6 and 0.9, with fields added up directly at the three outer points, differ from a point of mass 1 by a relative amount of at most $1.68\times10^{-14}$; what cannot be read from outside is one number, the radius. Paper 1116 showed numerically that for uniform ellipsoids what cannot be read from outside is the one confocal shift. In shrinking a function to finitely many numbers by fixing the stage in advance, this has the same form as the first step of Zeeman’s flat stage in the next section (shrinking the size to constants and linear expressions).

4. The size left by light

Light reads only which directions are null (the directions in which light travels). Taking 30 null directions $k$ of a metric $g$ and mapping a change $\delta g$ of the metric to the list of $\delta g(k,k)$, both for the flat metric $\eta$ and for a curved example $g_0$ (eigenvalues $-1.4370$, 0.3288, 0.8480, 1.4655), 9 of the 10 components are read and 1 is left. The direction left is that of the metric itself; the cosine of the angle between the two directions is 1.000000000000000. This is the 9 of 10 components of Paper 111. With 1, 16 and 81 points on a spacetime grid, the numbers left are also 1, 16 and 81. The size left by light alone is a function on spacetime.

Free fall and clocks read the derivative of the logarithm of this size. For the connection $\nabla$ fixed by light and free fall, choosing one metric $g$ in the conformal class fixes the 1-form $A$ in $\nabla g=A\otimes g$, and replacing $g$ by $e^{\sigma}g$ replaces $A$ by $A+d\sigma$ (the notation of Paper 111). When there is no second clock effect, $A$ is a gradient (in the words of Paper 111, $A$ vanishes or is an exact form); solving $d\sigma=-A$ fixes the metric, and what is left is one constant in $\sigma$. Paper 150 compared the connections of two conformally related metrics and checked that they share their geodesics only when the factor is constant (Weyl 1921); this is the case without a second clock effect. By the measure of this paper, reading the differences (the derivative) between neighbouring points on a four-dimensional grid $n^4$ leaves 1 for each of 16, 81, 256 and 625 points, 2 for two places not joined by paths of comparison, and 0 once the value at one point (the unit) is added (the smallest singular value kept is 0.1625 times the largest at 625 points). The one left is the unit for each part connected by paths of comparison, and its value is fixed by agreement, as Paper 111 wrote for the constant of Zeeman.

If the derivative being read is not a gradient, not even one constant is left. With $\nabla g=A\otimes g$, the length of a ruler changes along a path by the factor whose exponent is half of $A$ added up along the path. Going once around the unit circle, a gradient $A$ (the derivative of $\sigma=x^2y+\sin x$) gives an integral of $3.57\times10^{-16}$, but $A=(-y/2, x/2)$ gives $\pi$, and the ruler comes back $e^{\pi/2}=4.810477381$ times longer. This is the second clock problem written in Paper 96, and Paper 111 wrote its absence as the last step of Ehlers, Pirani and Schild.

There is also the route of fixing a flat stage in advance (Zeeman). Here only smooth conformal transformations are counted (Zeeman’s theorem does not even assume continuity; Paper 111). The polynomial solutions of the conformal Killing equation in $d$-dimensional Minkowski space,

$$\partial_\mu\xi_\nu+\partial_\nu\xi_\mu=\frac{2}{d}\,\eta_{\mu\nu}\,\partial\cdot\xi,$$

were counted while raising the degree. The size part is $\sigma=\partial\cdot\xi/d$.

dimension $d$solutions up to degree 1, 2, 3, 4dimension of the size part $\sigma$
24, 6, 8, 101, 3, 5, 7
37, 10, 10, 101, 4, 4, 4
411, 15, 15, 151, 5, 5, 5

In three and four dimensions the number of solutions stops at 10 and 15, in agreement with $(d+1)(d+2)/2$ in Paper 251. The size part stops at constants and linear expressions (the special conformal transformations). The special conformal transformation

$$x'=\frac{x-b\,x^2}{1-2\,b\cdot x+b^2x^2}$$

with $b=(0, 0.5, 0, 0)$ has a vanishing denominator on the light cone with vertex $x=b/b^2$ (the denominator can be written $b^2(x-b/b^2)^2$; it is also 0 at the point $x=b/b^2+(1, 0.6, 0.8, 0)$ on the cone), so it is not a one-to-one map of the whole spacetime. What is left of the size part is a constant, one overall stretch, the same as the size left by Zeeman’s theorem in Paper 111. In three or more dimensions the conformal Killing equation shrinks the size part to constants and linear expressions ($1+d$ dimensions in the table up to degree 4), and the condition of being one-to-one on the whole spacetime removes the linear part. The constant left is the end value after the derivative of the size has been read as zero. In two dimensions both the solutions and the size part grow with the degree, and a function is left. This corresponds to Paper 111 writing that in $1+1$ dimensions the causal order is too loose to fix the geometry.

5. How the numbers grow

The numbers left as the grid is refined, and the growth exponents, are listed.

what is leftcutnumber leftgrowth exponent
the +C of volume (reading areas)100 → 10001 → 10
interior per pattern (outside only, with the centre point)40 → 8040 → 801
interior per pattern (reading shell by shell)40 → 801 → 10
light only (components per point)2 → 316 → 814
light and the derivative of the size (free fall and clocks)4 → 51 → 10

When shells and patterns are both set to $n$ ($M=n$ shells, patterns up to $L=n-1$), the number left by the outside alone is the $M-1$ per pattern summed over the $(L+1)^2$ patterns plus the 1 of the centre point, $(M-1)(L+1)^2+1$ (the count of Paper 1107, with $M(L+1)^2$ unknowns and $(L+1)^2$ visible numbers, plus the centre point). It is 901, 7601, 62401 and 505601 for $n=10$, 20, 40 and 80, and the exponents of this formula, 3.076590, 3.037308 and 3.018358, approach 3 from above. The number per pattern was measured with singular values up to $\ell=4$; above that it was taken as $M-1$ because the kernel for each pattern is a product of a function of the source radius and a function of the observation radius (Paper 1107). The exponent is the dimension of the leftover: 0 for an end value, 1 for the interior along the radius, 3 for the interior of the ball, and 4 for a function on spacetime. Constants and functions split according to whether this exponent is 0 or positive.

6. Shared or distinct roots

The quantities of this paper are separated by the criterion of Paper 300. Paper 300 summed up what its five criteria (moving a variable, a correspondence that keeps identity, the route, the properties of the quantity, and the number of maps) have in common as looking not at the agreement observed but at what produced it. The criterion used is named at the end of each item.

(1) The +C of volume restoration and the number for pattern $\ell=0$ read from outside the skin: they are the values at the inner and outer ends of the same radial integral, stay at one however finely the grid is cut, and each fixes the other once the interior in between is known (Sections 2 and 3 checked that the +C comes back from the outer end and the interior in between). The two are joined by one equation, $q(R)-q(0)$ equal to the sum of the contents shell by shell (a correspondence that keeps identity). They share a root.

(2) The +C and the unit left after free fall and clocks are added to light: both are end values that a map reading differences (the derivative) sends to zero once per connected part (the route and the number of maps). They share a root. In this sense they also share a root with integration constants in general. What fixes the value differs: the +C is fixed by placing the inner end value (Section 2; reading the definite integral of Paper 12 as a volume), and the unit by agreement.

(3) The interior hidden from outside the skin and the end values: the interior is the function in between the ends and grows with the cuts (79 for $M=80$). They split by whether the growth exponent is positive or 0 (the properties of the quantity). Their roots are distinct.

(4) The interior hidden from outside the skin and the size left by light alone: both are functions, and adding a measurement that reads the derivative brings both down to the end values only. This response, however, occurs for every function in the same way, so it is not taken as evidence of a shared root. What produced the two differs: the interior is hidden because the outside field carries only one number per pattern (the field equation is of second order; Paper 1107), and light cannot read the size because the null directions do not move when the metric is multiplied by a factor (Paper 111) (the route). With a fourth-order field equation (the biharmonic kernel $|x-y|$), two numbers per pattern go out (Paper 1107), and the interior left by the outside alone drops to $M-2$, namely 8, 18, 38 and 78 for $M=10$, 20, 40 and 80 for patterns $\ell=0$, 1 and 2. The 1 per point left by light does not move with this variable, because the map of light (the null directions) does not use the field equation (moving a variable). The dimensions over which they spread also differ, 3 for the interior (in the ball) and 4 for light (in spacetime) (the properties of the quantity). The two fall into the same kind (functions), but their roots are distinct. The numbers left after the derivative is read also differ: for the interior one number per pattern is already read from outside, so 0 is left; for light 1 (the unit) is left.

(5) The function (Ehlers, Pirani and Schild) and the constant (Zeeman) of Paper 111: in the words of this paper they are the in-between part and the end value of the logarithm of the size (Section 4), which agrees with the judgement of Paper 111 that their roots are distinct.

7. The separator

The separator is whether a measurement reads the end values of an integral or the derivative in between. Measurements that read an end (the field outside the skin, the unit, the volume at one point) fix one number per pattern and leave the interior in between as a function. Measurements that read the derivative in between (areas or contents shell by shell, free fall and clocks) leave one end value per connected part. Reading both leaves nothing. The growth exponent of the number left as the grid is refined shows on which side a leftover lies: 0 for an end value, and for the interior in between, the number of dimensions over which it spreads (1 along the radius, 3 in the ball, 4 in spacetime).

Closing

What the skin and light leave undecided splits into constants and functions. The +C of volume restoration and the number read from outside the skin (pattern ℓ = 0) are the values at the inner and outer ends of the same radial integral; each stays at one however finely the grid is cut, and they fix each other once the interior in between is known. The +C is left once per connected part. The interior hidden from outside the skin is the function in between and grows with the cuts. The size left by light is a function on spacetime when only light is read, becomes one unit per part connected by paths of comparison once free fall and clocks read its derivative, and leaves nothing once the unit is fixed at one point. Which is left is decided not by the object but by what is measured.

References

  1. Ehlers, J., Pirani, F. A. E., and Schild, A. (1972). The geometry of free fall and light propagation. In General Relativity: Papers in Honour of J. L. Synge (ed. L. O’Raifeartaigh). Clarendon Press.
  2. Kellogg, O. D. (1929). Foundations of Potential Theory. Springer.
  3. Weyl, H. (1921). Zur Infinitesimalgeometrie: Einordnung der projektiven und der konformen Auffassung. Nachrichten von der Gesellschaft der Wissenschaften zu Göttingen.
  4. Yamagishi, Y. (2026). From Boundary Energy to Volume Energy [Paper 12]. YOI: https://www.yamagishiyuuki.com/yoi/12; DOI: 10.5281/zenodo.21404703
  5. Yamagishi, Y. (2026). Making the Curvature Constant Does Not Fix the Density [Paper 23]. YOI: https://www.yamagishiyuuki.com/yoi/23; DOI: 10.5281/zenodo.22090231
  6. Yamagishi, Y. (2026). $+C$ and $\Lambda$: A Duality on the Volume Degree of Freedom [Paper 62]. YOI: https://www.yamagishiyuuki.com/yoi/62; DOI: 10.5281/zenodo.21598317
  7. Yamagishi, Y. (2026). Reframing the Cosmological Constant [Paper 72]. YOI: https://www.yamagishiyuuki.com/yoi/72; DOI: 10.5281/zenodo.21650934
  8. Yamagishi, Y. (2026). The Gauge Principle [Paper 96]. YOI: https://www.yamagishiyuuki.com/yoi/96; DOI: 10.5281/zenodo.21758671
  9. Yamagishi, Y. (2026). The Two Noethers [Paper 107]. YOI: https://www.yamagishiyuuki.com/yoi/107; DOI: 10.5281/zenodo.21837205
  10. Yamagishi, Y. (2026). How Far Does Light Determine Geometry? [Paper 111]. YOI: https://www.yamagishiyuuki.com/yoi/111; DOI: 10.5281/zenodo.21961685
  11. Yamagishi, Y. (2026). What Light Cannot Measure Is a Density [Paper 150]. YOI: https://www.yamagishiyuuki.com/yoi/150; DOI: 10.5281/zenodo.22083989
  12. Yamagishi, Y. (2026). Special in Two Dimensions Is Not One Phenomenon [Paper 251]. YOI: https://www.yamagishiyuuki.com/yoi/251; DOI: 10.5281/zenodo.22161063
  13. Yamagishi, Y. (2026). The Three Hundredth Census: Whether Two Things Share a Root Is Decidable [Paper 300]. YOI: https://www.yamagishiyuuki.com/yoi/300; DOI: 10.5281/zenodo.22171914
  14. Yamagishi, Y. (2026). Whether the Boundary Determines the Interior Depends on What Is Measured and How Much [Paper 1051]. YOI: https://www.yamagishiyuuki.com/yoi/1051; DOI: 10.5281/zenodo.22903544
  15. Yamagishi, Y. (2026). When the Field Equation Is of Second Order, the Interior Can Be Read from Outside a Closed Skin Only as One Number per Angular Pattern [Paper 1107]. YOI: https://www.yamagishiyuuki.com/yoi/1107
  16. Yamagishi, Y. (2026). m = 4π Is the Mass of a Skin of Radius 1 at Density 1, and the 1/r² Ball Is That Skin Puffed Out Evenly [Paper 1114]. YOI: https://www.yamagishiyuuki.com/yoi/1114
  17. Yamagishi, Y. (2026). A Uniform Ellipsoid Pulls from Outside Like a Flat Focal Disc, and a Sphere Pulling Like a Point Is the Case in Which That Disc Shrinks to One Point [Paper 1116]. YOI: https://www.yamagishiyuuki.com/yoi/1116
  18. Zeeman, E. C. (1964). Causality implies the Lorentz group. Journal of Mathematical Physics.

Reference

Yamagishi, Y. (2026). The +C of Volume and the Number Read Outside a Skin Are Two Ends of One Integral, and the Hidden Interior Lies in Between [Paper 1125]. YOI: https://www.yamagishiyuuki.com/yoi/1125
ORCID: 0009-0006-8587-3450

PDF (English) · PDF (Japanese) · Date proof of the English PDF (OpenTimestamps .ots) · SHA256SUMS

The record page for this paper (in Japanese, with the PDFs in each language and the date proof): YOI 1125. This paper is a preprint and has not been peer reviewed.