Yamagishi Complexity Torus Lab山岸勇輝ラボ

YOI 1118:重力の芯とつながりの芯は別根で、楕円体のうち二つが同じ一点に重なるのは球だけである

論文1118 の記録のページです。住所(YOI)は https://www.yamagishiyuuki.com/yoi/1118 で、論文の本文は下の PDF にあります。ファイルは自分で用意した置き場所(https://yamagishi.sakuraweb.com)に置き、日付の証拠(.ots)を添えています。

YOI 1118第1版・2026年11月ビットコインに記録済み

日付の証拠(OpenTimestamps):日本語版の .ots・英語版の .ots・SHA256SUMS

住所:https://www.yamagishiyuuki.com/yoi/1118・CC BY 4.0・プレプリント(査読を経ていません)・ORCID 0009-0006-8587-3450

引用するとき

山岸勇輝 (2026). 重力の芯とつながりの芯は別根で、楕円体のうち二つが同じ一点に重なるのは球だけである [論文1118]. YOI: https://www.yamagishiyuuki.com/yoi/1118

Yamagishi, Y. (2026). The Gravitational Core and the Connectivity Core Have Distinct Roots, and Among Ellipsoids They Meet in One Point Only for the Sphere [Paper 1118]. YOI: https://www.yamagishiyuuki.com/yoi/1118

@misc{yamagishi2026yoi1118,
  author = {Yamagishi, Yuuki},
  title = {The Gravitational Core and the Connectivity Core Have Distinct Roots, and Among Ellipsoids They Meet in One Point Only for the Sphere},
  year = {2026},
  howpublished = {YOI: https://www.yamagishiyuuki.com/yoi/1118},
  note = {Preprint, edition 1}
}
指紋(SHA-256)と確かめ方
41c14d0ee7c8b9c9af344ecfe1def31d5d0810bd323035fa4c1835f6fd3e790c yamagishi_yoi1118_v1_jp.pdf
621a0b5a364d9548e24c1a37a656bcdb4f0a878327520c7d1cd7b5a62b038ee1 yamagishi_yoi1118_v1_en.pdf

PDF と .ots を同じ場所に保存し、opentimestamps.org に .ots、続けて PDF を落とすと、記録された日時が表示されます。PDF が 1 バイトでも変わっていれば通りません。

日付の証拠(OpenTimestamps)

2026年11月13日に、2 本の PDF の指紋(SHA-256)をまとめて OpenTimestamps に送り、ビットコインのブロック 975619・975620・975645 に記録されました(2026年11月13日 11:29(日本時間))。この .ots があれば、PDF がその時点で存在したことを、このサイトや運営者を信用しなくても、誰でも確かめられます。

書誌

題名重力の芯とつながりの芯は別根で、楕円体のうち二つが同じ一点に重なるのは球だけである
TitleThe Gravitational Core and the Connectivity Core Have Distinct Roots, and Among Ellipsoids They Meet in One Point Only for the Sphere
著者山岸 勇輝 (Yuuki YAMAGISHI)・ORCID 0009-0006-8587-3450
所属山岸複雑性トーラス研究所 (Yamagishi Complexity Torus Lab, Japan)
版第1版(2026年11月)
言語日本語・英語
種別プレプリント(査読を経ていません)
ライセンスCC BY 4.0(出典を示せば、複製・再配布・改変ができます)
YOIhttps://www.yamagishiyuuki.com/yoi/1118

要旨

論文1116 は、一様な楕円体を、外から見た重力を変えずに共焦点の族の中で縮め、行き止まりの芯が、球で点、細長い回転楕円体で線分、楕円体で平らな円盤になることを数えた。物を縮めるやり方はもう一つある。物の中に描いた輪が縮むかどうか(つながり)を変えずに、中身を連続に縮めるやり方で、中身の詰まった楕円体は一点まで、中身の詰まったドーナツは管の中心の輪まで縮み、そこで止まる。本稿の問いは、球を伸ばした楕円体、円を回したドーナツ、白玉をつぶしてくぼませた平たい形という三つの変形を、ディヴの定理(一様な相似な殻が囲む空洞の中で力が 0 になるのは、楕円体の殻だけ)とポアンカレ予想(どの輪も縮む閉じた 3 次元の空間は 3 次元球面だけ)と同じ「球の仲間」の話として並べられるか、である。本稿は二つの芯を同じ物の上で数え、論文300 の判定で分ける。本稿は新しい定理も法則も主張しない。ポアンカレ予想の証明にも、その別の読み方にもならない。重力の定数と物の重さを 1 にそろえ、外の場と殻の中の力は、物や皮をじかに足して求めた。第4節の皮を通る流れには、一様な楕円体の中の力の式を使い、じかに足す道と比べた。

楕円体 (3, 2, 1) の重力の芯は半軸 √8・√3 の円盤(次元 2)で、つながりの芯は点(次元 0)である。細長い回転楕円体では線分と点、球では点と点で、楕円体のうち、二つを同じ一点に重ねて置けるのは球だけである(論文1116 の芯の次元からすぐ出る)。中身の詰まったドーナツ(芯の輪の半径 2・管の半径 1)のつながりの芯は輪だが、その輪に重さを全部集めると、外の 3 点(うち一つは穴の中)の力は相対で 1.51×10⁻² から 1.09×10⁻¹ 変わる。輪の半径を √(R²+r²/4)=2.0615528 にすると、外から読める ℓ=2 の数がそろい、差は 4.84×10⁻⁴ から 1.33×10⁻² に下がるが、ℓ=4 の数は −5r⁴/16 だけずれて残る(記号で確かめた)。

中心から見て星の形の物に、相似に少し大きくした形とのあいだの薄い殻(厚みは中心から接平面までの距離 p に比例)を塗り、中の 3 点の力を比べた。楕円体二つでは 10⁻¹⁶ から 10⁻¹⁵ の桁(計算の誤差の大きさ)である。楕円体でない形では、凸の丸い立方体 x⁴+y⁴+z⁴=1 で 5.63×10⁻⁴ から 8.70×10⁻³、極のくぼんだ平たい形で 2.85×10⁻⁴ から 3.05×10⁻³、ピーナツの形で 1.38×10⁻³ から 2.93×10⁻² で、0 にならない。楕円体からくぼんだ形へ割合 t だけ寄せると、試した t のうち力が消えたのは t=0 だけで、t が小さいとき力は t にほぼ比例する。ドーナツは中心から見て p が −1 から 3 まで動き、皮の 0.195501 で負になるので、相似な殻がそもそも作れない(中心をほかの 4 か所に置いても負の所が残った)。星の形の物は中心へまっすぐ縮めれば一点になるので、相似な殻の条件(ディヴの条件)は「つながりの芯が点」より強く、くぼんだ形がそのあいだを分ける。

皮の上には 4π が二つある。全曲率は皮のつながりで決まり(ガウス=ボネ)、球の仲間(穴の無い物)で 4π、ドーナツで外側 +4π と内側 −4π の和 0 である。くぼんだ形でも、正の部分 12.660171 と負の部分 −0.093801 の和で 4π になる。皮を内向きに通る重力の流れは中の重さの 4π 倍で(ガウスの法則)、つながりによらない(中身の詰まったドーナツを包む皮で、4π との差 5.15×10⁻¹⁴)。二つの 4π がトーラスで分かれることは論文128 が書いた。本稿は、合計のそろう楕円体の上でも、二つの置き場所が逆へ動くことを数える。共焦点の族 (3, 2, 1) を芯の円盤へ縮めると、皮の面積の 1/10 を占めるふちの帯にある全曲率の割合は 0.359423 から 0.999908 へ上がり、流れの割合は 0.097399 から 0.034717 へ下がる(球ではどちらも 0.1)。曲がりの 4π は芯の円盤のふちへ、流れの 4π は芯の円盤の重さに沿って面へ行く。細長い回転楕円体を太さ 1 から 0.01 まで細くすると、面積の 1/10 を占める両端の全曲率の割合は 0.362834 から 0.992155 へ上がり、流れの割合は 0.089406 から 0.053189 へ下がる。

三つの唯一性、つまり論文01 の密度の指数 n=2、ディヴの楕円体、ポアンカレ予想の 3 次元球面は、「これだけ」という同じ形をしているが、選ぶもの(指数・平らな空間の中の物の形・空間そのもの)と、乗っているもの(殻の広さ 4πr²・場の質量が 0 のラプラス方程式・つながりだけ)が違い、別根である。分離子は、縮めるときに外の重力を保つか、縮まない輪を保つか、である。

キーワード:重力の芯、つながりの芯、ディヴの定理、相似な殻、全曲率、ポアンカレ予想、ドーナツ、分離子

Abstract

Paper 1116 shrank a uniform ellipsoid within its confocal family without changing gravity seen from outside, and showed numerically that the end point, the core, is a point for a sphere, a segment for a prolate spheroid and a flat disc for an ellipsoid. There is another way to shrink a body: shrink its inside continuously without changing whether loops drawn inside it can shrink (its connectivity). A solid ellipsoid then shrinks to a point, and a solid torus shrinks to the circle at the centre of its tube and stops there. The question of this paper is whether three deformations, the ellipsoid obtained by stretching a sphere, the torus obtained by revolving a circle and the flattened shape obtained by pressing a rice-flour dumpling with a dimple, can be lined up with Dive’s theorem (the force vanishes in the cavity enclosed by a uniform similar shell only for ellipsoidal shells) and the Poincaré conjecture (the only closed three-dimensional space in which every loop shrinks is the three-sphere) as one story about relatives of the sphere. This paper counts the two cores on the same bodies and separates them by the criterion of Paper 300. It claims no new theorem or law, and it is neither a proof nor another reading of the Poincaré conjecture. The gravitational constant and the masses are set to 1, and the fields outside and the forces inside shells were found by adding up the bodies or skins directly. For the flux through the skin in Section 4, the formula for the force inside a uniform ellipsoid was used and compared with the direct sum.

The gravitational core of the ellipsoid (3, 2, 1) is a disc with semi-axes √8 and √3 (dimension 2), while its connectivity core is a point (dimension 0). For a prolate spheroid they are a segment and a point, for a sphere a point and a point; among ellipsoids, only for the sphere can the two cores be placed on one and the same point (this follows directly from the dimension of the core in Paper 1116). The connectivity core of a solid torus (core circle of radius 2, tube radius 1) is a circle, but gathering all of its mass onto that circle changes the force at three outer points (one of them in the hole) by a relative amount of 1.51×10⁻² to 1.09×10⁻¹. With the radius of the circle changed to √(R²+r²/4) = 2.0615528, the number for ℓ = 2 that can be read from outside matches and the difference falls to 4.84×10⁻⁴ to 1.33×10⁻², but the number for ℓ = 4 stays off by −5r⁴/16 (checked symbolically).

For bodies that are star-shaped as seen from the centre, a thin shell was placed between the surface and a similar copy enlarged slightly about the centre (thickness proportional to the distance p from the centre to the tangent plane), and the forces at three inner points were compared. For two ellipsoids they are of order 10⁻¹⁶ to 10⁻¹⁵ (the size of the numerical error). For shapes that are not ellipsoids they do not vanish: 5.63×10⁻⁴ to 8.70×10⁻³ for the convex rounded cube x⁴+y⁴+z⁴ = 1, 2.85×10⁻⁴ to 3.05×10⁻³ for a flattened shape with dimpled poles and 1.38×10⁻³ to 2.93×10⁻² for a peanut shape. Moving from an ellipsoid toward the dimpled shape by a fraction t, the force vanished, among the values of t tried, only at t = 0, and it is nearly proportional to t while t is small. For a torus, p runs from −1 to 3 as seen from the centre and is negative on 0.195501 of the skin, so a similar shell cannot even be formed (with the centre moved to four other places, negative parts remained). A star-shaped body shrinks to a point when its inside is moved straight toward the centre, so the condition on similar shells (Dive’s condition) is stronger than "the connectivity core is a point", and the dimpled shape separates the two.

There are two 4π on a skin. The total curvature is fixed by the connectivity of the skin (Gauss–Bonnet): 4π for relatives of the sphere (bodies without holes), and for a torus 0, the sum of +4π on the outer side and −4π on the inner side. Even for the dimpled shape it is 4π, the sum of a positive part 12.660171 and a negative part −0.093801. The gravitational flux inward through the skin is 4π times the mass inside (Gauss’s law) and does not depend on the connectivity (on a skin enclosing a solid torus it differs from 4π by 5.15×10⁻¹⁴). Paper 128 already wrote that the two 4π part on a torus. This paper counts how, even on ellipsoids where the two totals agree, their places move in opposite directions. When the confocal family of (3, 2, 1) is squeezed toward its core disc, the share of the total curvature in the rim band that occupies 1/10 of the area of the skin rises from 0.359423 to 0.999908, while the share of the flux falls from 0.097399 to 0.034717 (both are 0.1 for a sphere). The 4π of curvature goes to the rim of the core disc, and the 4π of flux goes to the faces, following the mass of the core disc. When a prolate spheroid is thinned from thickness 1 to 0.01, the share of the total curvature at the two ends occupying 1/10 of the area rises from 0.362834 to 0.992155, and the share of the flux falls from 0.089406 to 0.053189.

The three uniqueness statements, the density exponent n = 2 of Paper 01, Dive’s ellipsoid and the three-sphere of the Poincaré conjecture, have the same form, "only this one", but they choose different things (an exponent, the shape of a body in flat space, the space itself) and rest on different things (the area 4πr² of a shell, the Laplace equation of a field of zero mass, connectivity alone), so their roots are distinct. The separator is whether shrinking keeps the gravity outside or keeps the loops that cannot shrink.

Keywords: gravitational core, connectivity core, Dive's theorem, similar shell, total curvature, Poincaré conjecture, solid torus, separator

版の記録

ここの PDF(倉庫の v1)は第1版(2026年11月)の原稿から作りました。ファイルは版ごとに分けて置いています(/yoi/1118/v1/ の下)。中身を直すときは、このファイルを書き換えず、新しい版を足します(住所 https://www.yamagishiyuuki.com/yoi/1118 はいつも最新の版を指します)。

YOI の一覧へ